Medical Instrument

BJA-XP Dental X-Ray Film Processor

Characteristic of the machine:
1. Open-room operation, small volume, lower noise, simple  operation, safe, fast and durable;
2. Classified as wall mounted model and desk top model;
3. Mute-film developing disposal may be competed when the developer and fixer is at 18~25 degree;
4. One place of film enters per 30 seconds for multi-film developing disposal, and the development may last 2~8 minutes, and this may be integrally adjusted in accordance with the exposure conditions of x-ray machine;
5. Multiple films of 2×3, 3×4 and 2.7×5.4cm may be applicable for the treatment of development;
6. It is convenient to regularity maintain this machine, and no tools is required to replace chemical solutions and wash relatable parts.

Technical Parameter:
Power: 220V+ 10%, 50~60Hz; Input power: 12W (Max);
Film run through time: 2-8 min; Defend grade: IP21;
Net Weight: 7.5KG; Dimension: 42x19x45cm

MD-300 USB Connected X-Ray Film Reader:


Power input:DC 5V (Provided by PC )
Current input: 300mA
Signal output:USB2.0 (All digitize)
Resolution:1600(H) X200 (V)
Cable length: 3m
Dimension:70mm×84mm×80mm
Main unit weight:430g

XRD-H Mobile Dental X-Ray Machine:

1. Adopted use the micro-focus x-ray tubes, makes the detail of image perfectly.

2. Low radiation leakage, at a distance of one meter, x-ray leakage is no more than 0.002mGy/h.
3. Digit controlled, easy to operate.
4.Wireless remote control ,safe and convenient to the user
5. Total Filtration:2.5mmAl;
6. Power: AC220V±10%,50HZ;
7. Tube power: 70KV, time of exposure: 0.2-4 second.

XRD-W Wall Mounted Dental X-Ray Machine:

1. Adopted use the micro-focus x-ray tubes, makes the detail of image perfectly.
2. Low radiation leakage, at a distance of one meter, x-ray leakage is no more than 0.002mGy/h.
3. Digit controlled, easy to operate.
4. Wireless remote control, safe and convenient to the user
5. Total Filtration:2.5mmAl;
6. Power: AC220V±10%,50HZ;
7. Tube power: 70KV, time of exposure: 0.2-4 second.

L1-AH Amalgamator:

1.Apply the scope: The machine can treat teeth, and blending silver amalgam capsules.

2.The function of machine:
a). Power voltage: AC 220V 50HZ
b). Motor power: 40W
c). Blending speed: 2800rpm for low speed, 4500rpm for high speed;
d). Range of timer: 4-60±0.5s
e). Noise level: less than 65db(A)
f). Gross weight: 2.7kg
g). Size: 300×255×240MM
Part list:
1). Main frame 1set
2). Quality Certificate 1piece
3). Spring 2pcs
4). Fuse 2pcs
5). Cramp 1set

L1-l500 Sealing Machine:

Power Supply: 220V, 50Hz;
Power: 400W;
Sealing Width: Max 250mm;
Impress Width: 10mm;
N.W/W.T: 5.5KG/6.0KG;
Packing dimension: 430x340x250mm;
Ideal sealing condition–adjustable sealing temperature;
Tidy cut–installed bi-blade cutting device to make sure the tidy cut; Easy operation–knock-down bang hanging bar is suitable for all kind of sterilizer sealing bags; Quality guarantee–heating material is made of space flight materials; Being made of medical paper and polypropylene layer, which indicates the sterilizing process by color diversity. Sealing the sterilizing object can make it stay in asepsis state for a long time. Standard weights for the sealing bags:5cm,7cm,10cm,15cm,20cm,length:200m,100m, to correspond to different sealing size.

L1-200B Ultrasonic Cleaner:

Power Supply: 220V, 50Hz;
Power: 300W;
Capacity: 39Khz;
Inside Size: 240x142x150mm;
N.W/W.T: 4.5KG/6.0KG;
Packing Dimension: 317x218x267mm;

Applicable range:
Cleaning polishing wax and dirt of dental handpieces, electrical parts, and little hardware products.

Unique functions:
Rinse time can be set from 2 to 30min,rinse temperature can also reset. Power is automatically u off when is lack of water.
External drainage system makes easy change of rinse liquid; low noise design makes quiet operation.
Specialized basket is designed for delicate minute devices that should be free from friction and braise, for example, high-speed and low-speed handpiece turbines.
Clear operation plate with digital display makes handy operation.

CJ68-1 Dental Electrical Alloy Melter:
Technical data:
1.Working temperature : >=900°C,
2.Power: 220V 50Hz
3.Power consumption: >=70VA ,

4.Mechanical pressure between electrode: 50N

CJ21 Polishing & Cutting Machine:

Technical data:
1. Power: Single-phase AC220V 50Hz 200VA
2. Motor: 2800r/min
3. Output: 180W

CJ23 Polishing Machine:

Technical data:

1. Power: Single-phase AC220V 50Hz 300VA
2. Motor: 2800r/min; 1400r/min
3. Output: 2800r/min 1800W; 1400r/min 120W

CJ31 Trimmer with Water:

Technical data:
1. Power: Single-phase AC220V 50Hz 600VA
2. Motor: 1400r/min

3. Output: 350W

K90 Table Electric Motor:

Technical data:
1. Power: Single-phase AC220V 50Hz 240VA
2. Motor: 4000r/min; 7000r/min; 10000r/min
3. Handpiece: 8000r/min; 12000r/min; 20000r/min; 30000r/min
4. Output: 70W

AX-B3 Fine Blasting Unit:

The AX-B3 Fine Blasting Units is used to polish the surface of porcelain crowns, it is a necessary dental equipment. It has a large window, and the twin-pen can be used to polish materials of different hardness. The transparent bottles enable users to observe the state of the sand during the sandblasting process. The advantages are: strong sandblasting power, smooth and accurate operations, and it is easy to repair. This sandblaster is a necessary tool for polishing surface of porcelain crowns in dentistry.

Voltage:220V/50Hz±10% Power:<8W Pressure:4kg/cmOptional part: Dust Collector Dimensions: 40×43×28cm Package size:49×47×36cm Weight:18kg

AX-D1 Electrolytic Polisher:

The AX-D1 Electrolytic Polisher is used in restorative dentistry, it can be used to polish objects that are polished by sandblasters such as cobalt-chrome alloys or objects made of stainless steel: denture frames, crowns and bridges and clasps. This machine can also be used to polish work pieces that are made of special materials. It has a delicate design and beautiful shape, its small size makes it a compact device. The two cylindrical electrolytic baths can work at the same time to improve its efficiency, and it can polish objects from all directions. The electrolytic baths are its cathode, and the anode is the clip which is used to hang castings. The timer controls the duration of electrolytic polishing, and the current can be controlled during the polishing process.

Voltage:220V/50Hz±10%, Power:150W
Timer:0-15min , Working current:10A
Dimensions:30×26×23cm, Package size:37×33×30cm, Weight:11.5kg

AX-Z2 Vibrator:

The AX-Z2 vibrator is used for duplicating or pouring plaster and agar. It can remove bubbles in molds, make the fillings homogeneous and dense. It is a necessary equipment for dental technicians. This machine is a newly-designed vibrator with adjustable and limitless vibration amplitude.
Power supply voltage:220V/50Hz±10%
Power: 100W
Maximum load:≤2kg
Dimensions:22×18×10cm
Package size:27×23×14cm

ML-02 Magnifier Lamp:

This product can magnify 12 times which enables them to see the defects in their work-pieces easily. This magnifier lamp can help dental technicians to do their melting, polishing and burnishing jobs which require precision.
Voltage:220V/50Hz±10%
Power:12W
Magnification:12 times
Package size:39×17×13cm
Weight:1.6kg